'manuals mycenter-1'

manuals mycenter-1

matteo milan (85.20.217.198) -

I dont'have a manuals of kitamura mycenter-1

Comment #1 NEOTEK S.R.L. (190.30.20.128) -

i need information to purchase the manual of the machine KITAMURA

MY CENTER 1

please send me any information as you can. Thanks.

Carlos Leguizamon.

NEOTEK S.R.L.

Comment #2 NEOTEK S.R.L. (190.31.0.241) -

i need more information about the manual of the machine KITAMURA

MY CENTER 1

please send me more information as you can (If you can MAIL ADRESS PLEASE). Thanks.

Carlos Leguizamon.

Comment #3 Andrew (24.71.62.30) -

Hi

I have some manuals for that machine. Fanuc m3 control

What do you need?

Comment #4 matteo milan (88.81.170.238) -

I need the variables for the parametric programming

Comment #5 heidi from cleveland ohio -

We have been serving the industrial cut gear trade since 1917. Our management and engineering personnel have accumulated a vast knowledge and experience in gear cutting that makes complicated requirements of today's industry a routine matter.

Our expertise in manufacturing special gears ranges from precision gears used in air conditioners for high-altitude planes to gears and involute splines used by shipbuilders, steel mills, and pump companies.

We warehouse thousands of pounds of rolled and forged steel and quantities of rawhide and Bakelite materials ready for quick processing of your order, not to mention the thousands of standard gear patterns available.

We look forward to serving your gear cutting needs.

• http://www.stahlgear.com

Comment #6 CadBug57 from Texas -

I just moved to Texas and started a job where they have a

"Kitamura Mycenter 1" that has been just sitting there for

years... I ran some machines with Fanuc control but I've

never seen a "kitamura".

I need information to purchase the manual for the machine

("MyCenter 1") with a 3M-C Control.

Any help with "Storing Files" and "Calling Up Files".

Transferring files to and from a PC.

I have the cable config and software for the pc I just need

to know how to set the control to send and receive files.

please send me any information as you can. Thanks.

Comment #7 Mukundan Kris (59.92.81.248) -

Dear all or anybody who is there

i need the procedure to enter tool offset in the machine

if i go to the tool height offset menu in the machine i can be able to select 001 002 like that but cant be able to enter any value in it

what may be the prblem behind it

with regards

Mukundan Kris

• Kitamura tool offset

Comment #8 Tomasino Cattalinni from Carrollton, Georgia -

Try the following for documentation and manuals:

Machinery Support

6425 Alondra Blvd

Paramount, CA 90723

Telephone: (562)-529-6081

Toll Free: (866)-MANUAL1

Fax: (562)-529-8982

Comment #9 julian (200.123.118.200) -

Estimado carlos, calculo que por el nombre debes hablar espaņol

la programacion parametrica en los controles fanuc (por lo menos e en la serie 0m) se parece mucho a la programacion en basic

lo primero que tenes que hacer es blanquear las variables (llevarlas a 0)

Programa ejemplo

%

:0020

N1 G17 G21 G40 G90

N2 M5 M19

N3 M06 T1

N4 S1400 M03

N6 M08 F400

N7 G00 X-187.65 Y-8.83

N8 G01 Z50.0 hasta aca posicione la maquina para trabajar

#1=0.0 llevo a cero la variable #1

#2=-0.4 establezco el paso en la variable #2

N10 IF [#1 EQ -15.2] GOTO 9010 establezco la condicion logica

si #1 es igual a -15.2 ir a la linea 9010

N12 Z50.0

N14 Z#1 le asigno la variable al eje que quiero variar

N16 G01 X-126.32Y-8.83

N18 F500

N19 X-126.32Y8.83

N20 X-167.50Y8.83

N34 X-167.50Y-26.50

N36 X-126.32Y-26.50

N38 X-126.32Y26.50

N40 X-187.65Y26.50

N41 Y-8.83 F400

N2000 G00 Z50.0

#1=#1+#2 terminada la operacion asigno un sumador logico

estableciendo que la variable #1 va a ser igual a la sumatoria de #1 y #2, de esta manera cada vez que termine una operacion, le va a sumar -0.4, hasta llegar a -15.2, de no ser igual a va a volver a repetir la operacion programada hasta llegar a -15.2

N2008 GOTO 10 vuelve al principio para repetir la operacion salvo que la variable #1 alcance -15.2, en ese caso termina el programa

N9010 Z50.0

N9020 M5 M30

%

espero haberte ayudado

saludos julian

Comment #10 J. Cesar (189.160.80.254) -

Please someone send me the manuals about Kitamura Mycenter 3 Operation, Maintenance, anything you have, jcsarcn@hotmail.com

Cesar

Comment #11 J. Cesar (189.160.80.254) -

Por favor alguien envieme los manuales de la Kitamura Mycenter 3 lo que tenga, mantenimiento, parametros, operacion, mi correo jcsarcn@hotmail.com

J. Cesar

Name:           
E-Mail:         

Optional (please add to our directory first)
Web Link:       
Link Title:     

Message:

Note: once you register your email address with CNC Machine it is used across our whole network of forums and blogs. You can create seperate profiles for each forum or blog, but use the same login.