'Serial Communication parameters'

Serial Communication parameters

335249 from Montgomery, AL -

We have a HT20SII lathe with the multi control. It has been awhile since we ran it and I don't remember the setting for upload/down load. I can up load but not download.

Comment #1 Josh from Wichita, KS -

which multi controldo you have?

Comment #2 reynaldogarcia1 (189.141.73.214) -

hi i had a hitachi seiki and i want to know a program edited by computer and the type of post tha the machine use is a hitachi seiki control seicos multi l.

Comment #3 Jay Johnson (63.164.212.26) -

We have a 1998 HT-23J that we no longer have an operator for. I am trying to learn it myself so I can train a new operator. The machine is supposed to have nose radius compensation, but it doesn't act like it is using it. Also does it use offsets? It has conversational programming built in and when it programs a tool it call up T0800 when I feel it should call up T0808. I changed one program to T0808 and it ran a part good but was not cuttng the ID correctly. so I changed it back to T0800 and when I ran the program it cut a big chamfer on the front of the part and I ended up wasting a piece of steel. Does anyone know how the offsetswork with this control?

Comment #4 chris (66.80.48.48) -

I have a HITACHI SEIKI VM40III WITH SEICOS LAMBDA 10M CONTROLS

I'M USING MASTERCAM 9.0 I CAN'T SEND THE PROGRAM FROM THE PC TO THE MACHINE I'M GETTING A FRAMING ERROR I CAN RECEIVE FROM THE CNC TO MASTERCAM BUT NO LUCK SENDING TO THE MACHINE

DOES ANYONE HAVE THESE CONTROLS AND USE MASTERCAM SO I CAN GET THE RIGHT PARAMETER CONFIGURATION .THANKS CHRIS

Name:           
E-Mail:         

Optional (please add to our directory first)
Web Link:       
Link Title:     

Message:

Note: once you register your email address with CNC Machine it is used across our whole network of forums and blogs. You can create seperate profiles for each forum or blog, but use the same login.