'CNC program'

CNC program

Clemente Leon from San Diego -

Hi

What code do I need to add so, the part goes to the from of the operator after is done.

What happens is that the part goes to the x0 and y0 of the machine, all the way to the left. I have a hass mini mill

Comment #1 tornero from queen city regina -

when its go to x0 y0 and z0 your using g28 send home position

probably it looks lik this

g28 x0 y0 z0

now you have to delete the g28 replaced by G00 X -8.0 Y7.O Z8.0

M30

Comment #2 jason (over worked and under paid) (24.253.204.67) -

you can use the g28 code if you delete the x0. For example g28 y0 z0 will send the tool to machine zero in the z axis and send the table to machine zero in the y axis. Machine zero is where the all axis' go after a power restart. This will probably be easier for you because you will have the same results from this line of code no matter what or where your part is on the table

Comment #3 Chirag Shah from Canada -

How I can find out Macro used in programming for Hass cnc milling machine.

Comment #4 hb tery (71.76.171.207) -

if you want your y axis to come to you at the end of program on the haas, you put in a z move up and out of the way and then a g90 g53 y.0, then your g91 g28 z0 on the next line. if you dont have you x axis where you want it, send it to machine coordinate x of whatever along with you g53 line.g28 will send your axis to home position. it works , i have been programming for 10 years now. fanu, yasnac and haas react the same way in this matter. good luck.

Name:           
E-Mail:         

Optional (please add to our directory first)
Web Link:       
Link Title:     

Message:

Note: once you register your email address with CNC Machine it is used across our whole network of forums and blogs. You can create seperate profiles for each forum or blog, but use the same login.