'Fanuc 15 M'

Fanuc 15 M

SIAVASH (87.107.38.64) -

I HAVE A PROBLEM WITH FANUC 15 M RAM PARITY ERROR WOULD YOU HELP ME IN THIS WAY.

Comment #1 sedat (81.214.57.110) -

you have to call to fanuc service and help them. because your sram can be faulty or fistly you can open with del and reset button,after this operation load system and sram files.if this alarm occur again,please call to fanuc.

Comment #2 DILIP (59.95.21.57) -

i thinnk your bubble memory card must be faulty.

firstly you have to clear parameter and program with procedure

stated in manual.

important - please check that u have parameter back up

Comment #3 star123 (220.226.172.250) -

Thanks dilip for your excellent help. I never know about this and always spend more money behind them. Its works for me.

Comment #4 guns from INDIA -

even i had a ram parity error and got out of it by clearing up all the programs and re-entered all the parameters too..the problem now is that i'm not able to enter the subroutines and the controller type is fanuc15m-f somebody pls. help me out..

Comment #5 ansari (217.218.149.194) -

in the name of GOD

your RAM has lost some of its data.

you must clear all data and then reentering parameters(via rs232)

for more informaition you can mail to me.

best RGD

ansari

Comment #6 senthil kumar kathirvelu from india -

can u send me a program for simple pocket with corner radius

Comment #7 neil (87.127.74.114) -

Fanuc 15 spares and repairs

Comment #8 PATRICK (70.55.177.113) -

Im having a problem with arcs in Z ....

exaple :

N110 G02 X2.750 Z-0.750 I0.500 K0.750

it only make a strait downword line instead of an arc

Am i missing somethikng ?

Comment #9 Jitendra Raikwar (122.168.120.187) -

I am facing problem in 840C Control. PLC program is corrupting in between operation after running some time. There is no power failure in between as UPS supply is provided to machine. we have to load it every time. why this is happening. I have checked the 24 VDC Power input supply to control is OK. Request Help.

Jitendra

Comment #10 jayesh vasani (59.95.208.90) -

How we can change language in fanuc 15m ?

pl guide us

regards,

jayesh

Comment #11 Moises (189.166.151.179) -

Siavash: you must clear all data and then reentering parameters, use hyper terminal(windows) or procom (symantec), in some CNC like 15Ma you need a psw

Comment #12 adeem from pakistan -

I have 4 axis CNC milling with FANUC 15M controller. an error occured when replacing batteries in OFF mode "RAM PARITY ERROR"

now the problem is that the connection from PMC to NC

plz help me out????

Comment #13 Deepak Bodhani from Pune, India -

Dear Friends,

We have a portable terminal called DIGI-HHT / LK which helps in taking all your CNC program files, NC data, PLC data etc before you clear the memory of FANUC for whatever reasons. After rectification, you can re-load all data back to FANUC in no time, via RS-232 port. Read more at digitech-engineers.com

Comment #14 Jonny from Orlando, FL USA -

My friend bought recently a KOMO router with a FANUC 15-M . We are trying to send a initial parameters ( zero points for each axle) from his computer but some is wrong. We tried some configurations found in Internet for the COM ports but still not working. Next suspect for us is the cable and connectors. Somebody know how most be each wire in both ends for a DB25 at the machine and DB9 at the computer?

Thanks

Comment #15 Steve (2) from Wisconsin -

Guns

Sounds like your subroutines are probably 8000 & 9000 program numbers. You have to go to settings PWE parameter should be 8000 change = 1 go to service parameter 2201 bit 0 set equal to 0 this allows editing of 9000 programs then should be able to load. If it is 8000 program numbers then it is parameter 11 bit 0 set equal to 0.

Comment #16 Anil Kumar Acharya (210.18.123.42) -

We are having a Makino make CNC machining center with fanuc make 15MA .All the datas were lost of its own.We have entered the required parameters thru backup.still m/c pmc is not getting on and m/c is down.

Comment #17 Steve (2) from Wisconsin -

Did you reload your PMC backup? Go to your CNC/PMC softkey and check that all your data is correct and your ladder is loaded. Did you set your option parameters correct? Parameters 9100 and up.

Comment #18 GISHOLT (85.154.155.207) -

In Daewoo HMC H80, I have alarm - B axis zero return. i.e - 0T 032 B NEED ZRN (ABS PCDR) . Can any body help me to fix this alarm. I think need to set in parameter.

Rgards,

Gisholt.

Comment #19 HITEC - SHIVAKUMAR (59.92.120.221) -

Hai patrick,

Before and after G02 check your G code, please avoid I & K value and use R value for radius machining. check your tool nose compensation as well. your tool radius should be less than your program value. In case of complication program please send drawing.

cheers,

Shiva

Comment #20 ravinder (118.95.68.181) -

i wants to change the ladder of 15m any body hv the editing softer

Comment #21 lee (203.160.1.72) - Wed Oct 8 23:29:59 2008

I having a problem with my OKK machine .The Y- axis is not enough of length and I can not entering to the troke limit .Somebody help me pls.Thanks

Comment #22 Shree from Pune india - Sat Oct 25 07:25:07 2008

Dear Mr Anil

On makino machine pmc is written in c language , and cannot see in the laddle format , after curuption of nc and pmc parameters u have to load pmc parameters manually so that communication between cnc and pmc starts. By pressing cnc/pmc key u may enter to the makino screen, if pmc parameter are healthy u can acess the manu otherwise system gets hang and u require to switch off and on again.pl define ur machine model, i may be able to help u .

Shree

• CNC Machine" target=_blank>problem on makino machine

Comment #23 Farhad (213.217.33.82) - Fri Nov 14 13:30:50 2008

Hello ...

I need maintenance manual of "FANUC 15MA" cnc controller.

please send me it by e mail "tedy5555@yahoo.com

Thanks

Name:           
E-Mail:         

Optional (please add to our directory first)
Web Link:       
Link Title:     

Message:

Note: once you register your email address with CNC Machine it is used across our whole network of forums and blogs. You can create seperate profiles for each forum or blog, but use the same login.