'ALARMS'

ALARMS

victor from CARSON CITY NV -

CAN ANYONE HELP I HAVE THIS LIST OF ALARMS AND CAN NOT CLEAR THEM.

Alarms found on machine model SL-OB

M/N 731

Yasnac controller MYNC-L1

342: servo error (z)

341: servo error (x)

310: servo off

202: ot (z)

201: ot (x)

400: seq error2

175: mem error (marc)

174: mem error (keep)

173: mem error (prm)

172 mem error (set)

Comment #1 bachir (193.194.92.5) -

please could you give the solution of probleme of alrame (al 05)of emco f1 cnc

and what i do

good luck

think you

Comment #2 kamran (125.209.115.133) -

There is an alarm on the machine display . “A102 Electric Cabinet temperature too high”.In the cabinet, output from +D1-E1 is checked on terminal +M12-X1 (d20) and it is 24V.This is input for Diode Matrix Card. This card has 32 Opto-Couplers which have been checked. This Matrix card has four Rows as SCN0, SCN1, SCN2, SCN3. The problem is with SCN1, which does not go low whereas SCN0 goes low. This is compulsory to read inputs from the machine. One of these inputs is Electric Cabinet Temperature. ON FX 63 CARD, the output of ROM 4A makes address for 3 to 8 line decoder 74LS138 (B4). One output of this decoder is Clock Pulse CP for latch 74LS273 (K7). The 4-bit data for this latch comes from a transceiver 74LS640 (E4). The output of this data latch is input for another open-collector decoder 7445 (L7). The output of this decoder generates Row inputs (SCN0 ..SCN3) for Diode Matrix card.

The problem which I have known is with the 4-bit data input for transceiver 74LS640 (E4). I want to know about this data. From which PCB of the system TX8D, this 4-bit data is generated for this transceiver (E4). Please mention the I.C. on that PCB.

Comment #3 DAVID NAVARRO (69.44.67.158) -

I HAVE A ( 1093: MEMORY ERROR ( OFS ). ON A YASNAC CONTROL. WHAT CAN I DO TO CLEAR IT?

Comment #4 david navarro from santa ana,ca. -

1093 MEMORY ERROR ( OFS ). ON A YASNAC CONTROL. WHAT CAN I DO TO CLEAR IT?

Comment #5 sandeep (59.96.173.16) -

Plese send me daily alarm of fanuc series OT, Oi and sinumerik 810D cnc comtrollere with solution.

Comment #6 KARTHI from BANGALORE -

i am facing a problem in the siemns 802d system.during axis moment in jog mode at100%.

i got a following error in one side was very high and another side was ver low.what i will do i get a same values in both sides.

Comment #7 ravi (58.178.108.15) -

hi guys,

i own a hyundai cnc lathe with sinumerik 840c controller, along with barfeeder ( bartec). When the machine is turned on the 9115 alarm appears on the screen and im unable to figure the way to reset it.

Would apprecite if any one can suggest to fix the problem.

Kind Regards,

Ravi

Comment #8 Nicolas (71.41.127.146) - Wed Jul 16 13:38:19 2008

mazak vtc-20c I lost my home positioning, how can I get my home axis positioning back again?

Comment #9 shan (202.125.143.74) - Tue Aug 26 15:47:54 2008

i have problem in my macjine servo dgtlparameter alarm in x&z axis.machine made by colchester tornedo 100 by fanuc OT.i entered all parameters of x&z but alarm can't rest plz tell me about it

Name:           
E-Mail:         

Optional (please add to our directory first)
Web Link:       
Link Title:     

Message:

Note: once you register your email address with CNC Machine it is used across our whole network of forums and blogs. You can create seperate profiles for each forum or blog, but use the same login.