'custom macros'

custom macros

J. K. (24.123.217.217) -

I was installing a Twin Tape on a old Victor with Fanuc 10 controls. Just when everything seemed to be working correctly I decided to clear the memory to gain space. That was when I lost the custom macro Victor had written to cause a tool change. Does any one have access to

this macro? I would greatly appreciate hearing from you.

Comment #1 Joe Lopez (75.16.36.249) - Tue Jun 10 21:49:57 2008

TXX(Tool number) M06(Tool Change)

Comment #2 Steve (2) from Wisconsin - Wed Jun 11 07:37:13 2008

-Joe he's asking for the custom macro "program" not how to do a tool change.

-J.K. You will probably have to contact to MTB in order to get the program, if they are still around. Also you will probably not get much luck in this forum, there is not a lot of activity. Here are the 3 other forums that I use. You will have to sign up but it only takes about 2 minutes.

www.gefanuc.bn si.net/eforum/index.php

www.practicalmachi nist.com/vb/index.php

www.cnczone.com/

Comment #3 Steve (2) from Wisconsin - Wed Jun 11 07:42:01 2008

J.K my apologize but this forum only allows 24 charters in one word so I had to add a space in the website addresses I gave you. Take the space between n and s in the first and i and n in the second.

Comment #4 Wilbur Corncob from North America - Thu Jun 12 07:14:34 2008

If you use the weblink box you can enter url's and they will show as links... one per message... but you could enter a couple messages.

Comment #5 Steve (2) from Wisconsin - Thu Jun 12 07:58:08 2008

I didn't know that. Thanks for the tip Wilbur

Name:           
E-Mail:         

Optional (please add to our directory first)
Web Link:       
Link Title:     

Message:

Note: once you register your email address with CNC Machine it is used across our whole network of forums and blogs. You can create seperate profiles for each forum or blog, but use the same login.