'yaskawa varispeed input power'

yaskawa varispeed input power

eric (165.21.154.108) -

hi, anyone know the model CIMR-VMS27P5 (VS-626VM3 CONTROLLER) POWER ?

PC BOARD ON TOP (TERMINAL 24CN) CONTROL POWER INPUT VALUE,BECAUSE I WANT TO KNOW INCOMING POWER PROBLEM OR BOARD PROBLEM?

Comment #1 Chong (60.48.110.54) -

Hi, anyone know how to repair the (626VM3) controller board cause fault alarm F-900 , F-903 & F-906. Thanks.

Comment #2 MR KWOK (203.198.81.219) -

alarm "CPF00" ON 626VM3

Comment #3 felipe ramirez (66.121.100.51) -

Hi, somebody now how to repair the 626VM3 controller I have the alarm "F-C00"

Comment #4 art-industrial from Canada -

We are able to repair 626VM3 and any other electronic

unit / board / system located in CNC machine, see here:

www.art-industrial.com

See our repair catalog for Yaskawa

• http://www.art-industrial.com/industries/cnc.html

Comment #5 art-industrial from Canada -

As for alarms, I can say you the following:

F-C00 alarm: you have to check connection between controller and motor encoder. There are 3 possible reasons for this error:

encoder, encoder cable and the 626VM3 controller. If the connection is ok, 90% you have problem with 626VM3. We can repair it.

CPF00 alarm: internal (memory) failure of the controller. We can repair it.

F-900, F-903, F-906 alarms: Thermal alarms. It seems to be electronic problem of the controller. We can repair it.

As for input control power (voltage?), it should be between 200-240 VAC

• http://www.art-industrial.com/catalog/y.html

Comment #6 MIGUEL GONZALEZ (201.163.34.226) -

Hi.

I have a Varispeed 626VM3 drive with a F-100 failure alarm.

Can anyone help me to solve the problem? We replaced allready the power modules.

Thanks a lot!!

Miguel González

Comment #7 SURI SREENIVAS (203.117.173.210) -

CAN ANYBODY GIVE ME THE INPUT VOLTAGE RANGE TO THE YASAKAWA VVVF DRIVE WITH AUTHENTICITY FOR MODEL NO. CIMR-G7B4037.

Comment #8 J.SIVASANAKRAN (210.18.91.90) -

We have the problem with 626VM3 varispeed drive with F D-14 alarm on the drive, The orientation of the spindle is not getting during command and the above alarm occurs. Any body can help me regarding this problem

Comment #9 Seastrom mfg. (67.129.129.162) -

I have a Varispeed 626VM3 drive with a F-604 fault.

Called tech. support several times and checked as suggested the voltage and frequency.couldn't find anything.

I am not sure what the fault F-604 is.

Comment #10 F-100 failure alarm (159.134.94.21) - Wed Sep 10 05:52:10 2008

We have a Varispeed 626VM3 drive with a F-100 failure alarm.

Is possible to resolve the issue?

Comment #11 JULIO DLEGADO (64.218.40.75) - Fri Sep 26 12:45:32 2008

I HAVE VARISPEED 626VM3 SPINDLE DRIVE W/ F-100 ALARM

CAN SOMEBODY HELP ME SOLVE THIS PROBLEM

THANKS

Name:           
E-Mail:         

Optional (please add to our directory first)
Web Link:       
Link Title:     

Message:

Note: once you register your email address with CNC Machine it is used across our whole network of forums and blogs. You can create seperate profiles for each forum or blog, but use the same login.